ext2file-systems for submitting dynamic data to a Cartesi Machine
Shifting our focus from understanding and testing GPG usage to an actual implementation of our DApp's Cartesi Machine, we must first of all acknowledge that our final machine cannot simply read the document and signature data from pre-defined files. Rather, those two pieces of data should be read as separate input drives, so that they can be submitted in a smart contract request.
Unfortunately, as noted in the Cartesi Machine section, there is no direct way of generating
ext2 file-systems in a reproducible way, so these input drives have to be raw. This means that, instead of being mounted as file-systems, the drives' contents are to be read and written directly as plain bytes. Therefore, since we do not know in advance the exact size of the document or the signature, we will choose to encode the document and signature content lengths in the first two bytes of the input drives' data, so that we can correctly read the binary contents.
Aside from that, when writing the previous section's Cartesi Machine example, you may have noticed that specifying all those command instructions as a single line was quite cumbersome. Thus, to tackle that issue and better organize our DApp, we will specify our final machine's commands in a separate shell script file, and include that file in the
ext2 file-system that our machine is already using to have access to the public key.
Back in the
gpg-verify/cartesi-machine directory, create a file called
gpg-verify.sh and make it executable:
touch gpg-verify.shchmod +x gpg-verify.sh
Now, edit that file and insert the following contents:
#!/bin/sh# reads document data as a binary string whose length is encoded in the first 2 bytes, and stores it in file 'document'dd status=none if=$(flashdrive document) | lua -e 'io.write((string.unpack(">s2", io.read("a"))))' > document# reads signature data as a binary string whose length is encoded in the first 2 bytes, and stores it in file 'signature'dd status=none if=$(flashdrive signature) | lua -e 'io.write((string.unpack(">s2", io.read("a"))))' > signature# imports public key informing that it can be trusted (0xA86D9CB964EB527E is the key's LONG id)gpg --trusted-key 0xA86D9CB964EB527E --import /mnt/dapp-data/descartes-pub.key# verifies document signaturegpg --verify signature document# writes gpg verify's exit status to output: 0 is success, 1 is failure, other values indicate errorecho $? > $(flashdrive output)
The first lines of the above script read the document and signature data from their respective input flash drives, and use a tiny Lua script to read the data considering the two initial bytes as the content length. The contents are then written to local files respectively called
signature. After that, the script uses
gpg to import the public key provided in the mounted
dapp-data file-system, and finally verifies if the signature is valid for the given document. The final exit status is then written to the output drive.
With the execution script ready, we can now build the actual
ext2 file-system that we are going to use in our machine. This will be very similar to the process we did in the previous section for our tests, but now we will include the new
gpg-verify.sh script we just wrote, while leaving out all of the test data.
First, create a directory called
ext2 within the current
gpg-verify/cartesi-machine directory, and copy the public key and execution script files into it:
mkdir ext2cp descartes-pub.key gpg-verify.sh ext2/
Now, use the
genext2fs tool within
cartesi/playground Docker image to build the
docker run \-e USER=$(id -u -n) \-e GROUP=$(id -g -n) \-e UID=$(id -u) \-e GID=$(id -g) \-v `pwd`:/home/$(id -u -n) \-w /home/$(id -u -n) \--rm cartesi/playground:0.1.1 \genext2fs -b 1024 -d ext2 dapp-data.ext2
After the command completes. a file called
dapp-data.ext2 with the expected contents will be present in the current directory.
After building our
ext2 file-system, we can then proceed to the final implementation of our Cartesi Machine. As done for all the other tutorials, we will code a bash script to make it easy for us to build (and rebuild, if necessary) the final machine's template specification, and store it the appropriate location.
In order to that, create a
build-cartesi-machine.sh file in the
touch build-cartesi-machine.shchmod +x build-cartesi-machine.sh
Now, place the following contents into it:
#!/bin/bash# general definitionsMACHINES_DIR=.MACHINE_TEMP_DIR=__temp_machineCARTESI_PLAYGROUND_DOCKER=cartesi/playground:0.1.1# set machines directory to specified path if providedif [ $1 ]; thenMACHINES_DIR=$1fi# removes machine temp store directory if it existsif [ -d "$MACHINE_TEMP_DIR" ]; thenrm -r $MACHINE_TEMP_DIRfi# builds machine (running with 0 cycles)# - initial (template) hash is printed on screen# - machine is stored in temporary directorydocker run \-e USER=$(id -u -n) \-e GROUP=$(id -g -n) \-e UID=$(id -u) \-e GID=$(id -g) \-v `pwd`:/home/$(id -u -n) \-w /home/$(id -u -n) \--rm $CARTESI_PLAYGROUND_DOCKER cartesi-machine \--max-mcycle=0 \--initial-hash \--store="$MACHINE_TEMP_DIR" \--flash-drive="label:dapp-data,filename:dapp-data.ext2" \--flash-drive="label:document,length:1<<12" \--flash-drive="label:signature,length:1<<12" \--flash-drive="label:output,length:1<<12" \-- $'date -s \'2100-01-01\' && /mnt/dapp-data/gpg-verify.sh'# moves stored machine to a folder within $MACHINES_DIR named after the machine's hashmv $MACHINE_TEMP_DIR $MACHINES_DIR/$(docker run \-e USER=$(id -u -n) \-e GROUP=$(id -g -n) \-e UID=$(id -u) \-e GID=$(id -g) \-v `pwd`:/home/$(id -u -n) \-h playground \-w /home/$(id -u -n) \--rm $CARTESI_PLAYGROUND_DOCKER cartesi-machine-stored-hash $MACHINE_TEMP_DIR/)
Comparing this to the test Cartesi Machine of the previous section, we can see that we now have individual input flash drives for the document and signature data, as well as an output flash drive. Futhermore, the command line executed is a lot simpler, since we now moved most of the complexity into the
At this point, the machine template can be built and appropriately stored in the Descartes SDK environment by typing:
Giving an output such as this:
0: 368aca58c884ef4ce2fa5c58b3f859ce8d001e725706f2d1e329fa1d7ae72f52Cycles: 0Storing machine: please wait
Similar to the issue discussed in the GenericScript tutorial, the template hash generated for your machine will certainly differ from the one seen here. This is because, as noted in the beginning of this section and explained in the Cartesi Machine host perspective, using the
genext2fs tool to build a new
ext2 file with the same contents will actually always lead to a slightly different file, which as a consequence changes the initial state of the machine. Therefore, to produce the same hash
368aca58.. presented above, you should have the exact same
ext2 file used when writing this tutorial. This file is available in the Descartes Tutorials GitHub repo, and as such you can download it and rebuild the machine template with the following commands:
wget https://github.com/cartesi/descartes-tutorials/raw/master/gpg-verify/cartesi-machine/dapp-data.ext2./build-cartesi-machine.sh ../../descartes-env/machines
Which should now produce the expected hash
With all of this done, move back to the
gpg-verify home directory before proceeding to the next section: